- Store
- >
- WATERSPORTS
- >
- Booms, Towers & Pylons
- >
- BAMR-W404 * Bass Boat Pylon
BAMR-W404 * Bass Boat Pylon
BAMR-W404 * Bass Boat Pylon
Do you have an outboard boat that you’d like to safely ski behind, but it is not outfitted with a pylon? Barefoot International has you covered! Our stainless-steel pylons use triangular geometry and high-quality steel to produce a rock-solid hitch point for your rope.
The Bass Boat Pylon is specifically designed to mount in the rear seat mount bracket of your boat. Once the anchors for the support arms are installed, you can put this pylon on and take it off in seconds by pulling 3 hitch pins. It has a fixed height of 42”. This pylon is also equipped with a Delrin swivel at the hitch point to reduce strain on your ropes and make for seamless transfers from side to side behind the boat.
WARNING! Aftermarket pylons should NOT be used to tow tubes/other inflatables, multiple skiers, or stranded boats. They are only safety rated for one individual skier/wakeboarder.
- Bass Boat Pylon
- Stainless Steel
- The Bass Boat Pylon is designed to utilize the seat mount of your bass boat. It can be quickly installed and removed and has two telescoping support arms that provide stability.
Last Chance Item
WARNING:
This product can expose you to chemicals including Diisononyl phthalate (DINP), which is known to the State of California to cause cancer. For more information go to www.P65Warnings.ca.gov.