- Store
- >
- BOAT ENGINE PARTS
- >
- Skeg - Keelshield
- >
- 665-3 * Megaware SkegPro Skeg Protector - 3 Sizes Available
665-3 * Megaware SkegPro Skeg Protector - 3 Sizes Available
SKU:
$84.79
79.95
84.79
$79.95
$79.95
Unavailable
per item
665-3 * Megaware SkegPro Skeg Protector - 3 Sizes Available
The Megaware SkegPro protects your motor's skeg against harsh marine environments. It conforms to your lower unit to ensure there is no discernible drag or compromise in performance. A drain hole keeps water from collecting and remaining stagnant, which could cause corrosion or freezing. SkegPro's mirror-polished finish creates a custom look and lasting protection. Megaware's SkegPro is easy to install and can be done in minutes.
Features:
- Mirror polished finish
- Protects against ramp dragging, rocks, debris, and submerged objects
- Drain hole prevents corrosion and freezing
- Do-it-yourself installation takes less than 10 minutes
- Three year warranty
- How to Install Megaware SkegPro Skeg Protector
- If needed, repair skeg to ensure proper fit before installing SkegPro.
- To enhance appearance, prime and paint skeg before installing the SkegPro.
- Using a leather, rubber, or wooden mallet, place the SkegPro on the skeg and gently tap on it to get it started.
- Drive it on with the mallet until fully seated.
- Using the pre-drilled mounting hole as a pilot hole, drill the skeg using a 3/16" drill bit.
- Install the stainless steel hardware.
Megaware SkegPro Application Guide
Evinrude/Johnson
- 665 - 115 HP 200 - up
- 667 - 200 HP High Output 2003-2007
Honda
- 665 - BF 50 HP 2008
Mercruiser
- 667 - Bravo One 1992 - up
- 667 - Bravo Three 1992 - up
- 668 - Bravo Two 1994 - up
Mercury
- 665 - 15 HP Big Foot 4 Stroke 2003 - up
- 665 - 25 HP Big Foot 4 Stroke 1998 - up
- 665 - 40, 50 HP 1995 - up
- 665 - 60 HP 4 Stroke + EFI
Yamaha
- 665 - 40, 50, 60 HP 4 Stroke (does not fit lower HP)
- 667 - VMAX 250 HPDI 2003
California Residents: warning sign WARNING Cancer and Reproductive Harm - P65Warnings.ca.gov