- Store
- >
- BOAT PAINT
- >
- Topside Paint
- >
- AMRS-3106Q * Pettit Easypoxy High Gloss Topside Marine Paint - 21 Colors Available
AMRS-3106Q * Pettit Easypoxy High Gloss Topside Marine Paint - 21 Colors Available
AMRS-3106Q * Pettit Easypoxy High Gloss Topside Marine Paint - 21 Colors Available
Pettit Easypoxy is an advanced polyurethane paint that provides long-lasting and effective gloss retention. Pettit EZ-Poxy is a popular choice for topside and deck applications as a result of its vibrant shine and silicone-based formula. It also creates a professional, streak-free finish. This topside marine paint generates a brilliant surface shine, similar to gel-coating, with a fraction of the effort. Its advanced ultraviolet filters ensure that the superior gloss finish is both durable and effective. Economical EZ-Poxy is not only available in white but a variety of 25 topside colors. Using the simple roll and top method, Easypoxy allows even novices to achieve superior results.
Features:
- Highest Gloss Finish Topside Enamel Paint
- Creates a Tough, Weather Resistant Coating
- Very Easy Application, Excellent, Streak-Free Coverage (Roll and Tip Application Technique Recommended for larger projects)
- Advanced Ultraviolet Filters Resist Finish Breakdown for Superior Gloss Retention
- Shipped Via Ground Within the Continental U.S. Only
Specifications:
- Finish: High-gloss
- Coverage: 600 sq. ft/gal.
- Number of Coats: 2 minimum
- Pack Size: 1 US Quart, 1 US Gallon (White, Off White, Semi Gloss White Only)
Associated Products:
Pettit 120 Thinner: Use for brushing, rolling and clean-up.
Pettit 121 Thinner: Use for spraying.
Pettit Satin Additive: Will produce a semi-gloss to semi-flat finish often desired for non-glare deck surfaces and interiors.
Suggested Primer: Pettit EZ-Prime
Pettit EZ-Prime should be used as a base coat whenever the surface to be painted is aged, cracked, checked, pitted or in any way less than smooth. It can be applied to fiberglass, wood and previously painted surfaces. Dries quickly and is easy to sand. (Formerly Sold As: Pettit Easypoxy Undercoater.)
How to Apply Pettit Easypoxy Topside Paint
Be sure to stir Pettit Easypoxy thoroughly before use. Easypoxy may be applied by brush, roller, conventional or airless spray. Apply one thin, even coat of Easypoxy per day. After an overnight dry, lightly sand with 220 grit sandpaper and apply a second coat.
- Application Method: Brush, roller, or spray
- Number of Coats: 2 Minimum
- Dry Film Thickness per Coat: 1.5 mils (3 wet mils)
- Coverage: 600 sq. ft/gal.
- Application Temp: 50°F Min. / 90°F Max.
- Thinner: 120 Brushing, 121 Spraying
It's recommended to not thin Easypoxy when applying with a brush or roller, however, in hot weather 5-10% of Pettit 120 Brushing Thinner can be added to maintain a wet edge. For best results on large, smooth surfaces, roll out using a short nap roller followed immediately by leveling off with the tip of a brush. For conventional spray applications, thin 15-20% with Pettit 121 Spraying Thinner. For airless spray application, thin up to 5% with Pettit 121 Spraying Thinner. Utilize a 0.11-0.15" diameter tip for application.
California Residents:
WARNING Cancer and Reproductive Harm - P65Warnings.ca.gov